The Turbovac T50 vacuum packer is the new version of the 450STE table top machine ideally suited to vacuum pack fish or long and thin products. The vacuum packer comes complete with two seal beams of 320mm in length positioned one on the right and one on the left of the chamber. The distance between the two seal beams is 800mm allowing plenty of space to fit any product you are packing. The seal beams create a double seal and can be altered easily to seal and cut off just by exchanging one of the wires. The vacuum packing machine is fitted with a world renown Busch vacuum pump, the internal components of which are coated for prolonged life. The T50 vacuum packer is part of T-series range which have been conceived around the idea of making the packing of several products (food or non food) as easy as possible for the operator of the vacuum packing machine. The vacuum packers electronic parts are protected to IP65 water and dust protection levels and the vacuum packer comes as standard with sensor control which is accurate to 1mBar of vacuum. The vacuum packers control panel will automatically tell the operator when a service is required helping minimize service costs and help service management. Vacuum packer service kits are available to buy from our website and come complete with instructions on how to carry out the service. The vacuum packing machine is constructed from stainless steel with a stainless steel chamber. If you require a smaller table top machine then take a look at the 440ST machine, or if you require a larger floor standing model to be used for longer periods of time then look at the SB520 vacuum packer.